Installing a new Button Box

Installing a new Button Box

Problem:
The button box is no longer functional or the cleaning instructions are no longer effective, you will have to contact Impirica support for a new button box. Once you receive the new button box, you can follow the following instructions to successfully complete the replacement.

Solution:
  1. Ensure the system is shut down and unplugged from the power source.
  2. Lower the machine into its flat position and ensure the silver bolts are locked into place.
  3. Flip the machine upside down to gain access to the stand plate.

  4. Undo the 10 screws holding the plate to the stand.

  5. Once the place is removed, you should see the button box with a USB cable plugged in. Unplug the USB cable from the button box.
  6. Undo the 4 screws holding the button box in place.

  7. Remove the old button box and carefully slot the new button box in place.
  8. With the new button box in place, screw in the 4 screws.
  9. Plug in the USB cable
  10. Place the bottom plate back in place and screw in the 10 screws.
  11. Turn the system back to its normal position.
  12. Turn on the system

Check the functionality of the new button box:
  1. Check if the all 3 buttons have lights turned on
  2. Start a practice session and run the following tasks to test if the button box is working:
    1. Task 3 to test if the center button is working as intended
    2. Task 4 to test if the left and right buttons are working as intended

Should you have any questions or require additional assistance, you can contact us via one of the following methods:

  1. Submitting a ticket by using the "Add Ticket" button at the top of the page.
  2. Using the chat feature at the bottom right corner of this page.
  3. Sending us an email at [email protected]
  4. Giving us a call at 1-855-365-3748 ext. 1.

    • Related Articles

    • Button Box Cleaning Instructions

      Over time, residue may build up between the buttons and the button housings on the system.  This can cause the buttons to stick slightly in the housing when pressed down and can slow the return of the buttons to the up position when released.  Having ...

    • Installing an External Speaker

      Guide: To install the external speaker on your VITALS machine, follow the below steps. Feed the speaker’s two ends through the cable routing hole in the DCAT’s stand arm.  Use the speaker’s built-in clip to attach it to the back of the DCAT’s stand ...

    • Forgotten Password or Username

      Problem: If you have forgotten your password or username, please use the links on the login page to recover  them via email. If you no longer have access to the email account you used to register your account, please contact Impirica support. Please ...

    • Changing Computer/Monitor on the Stand

      Problem: Your touch screen computer needs to be replaced and you have received a new device from Impirica. You can follow the below instructions to complete the replacement. Solution: Ensure the computer is powered down and disconnected from the wall ...

    • Connecting to a Hotspot

      Setting up Personal Hotspot using an iPhone or iPad Settings Cellular Personal Hotspot or Settings Personal Hotspot Allow Others to Join               Setting up Personal Hotspot using an Android device Settings Network and Internet Hotspot and ...